Our main products include φ48 and φ60 disk lock scaffolds, galvanized steel tubular scaffolds with couplers, square column fasteners, beam clamps, etc. The services we provide include R&D, production, rental, sales, engineering, and technology consulting. We contribute to the successful completion of engineering construction by engaging in cost control, quality control, labor management, progress management, and safety management. The scaffolding system can build 60-meter floor-standing exterior scaffolds, and use the square steel tube and aluminum beam as the main keel to ensure the large spacing of the upright tubes. This can effectively reduce the steel use, thus saving cost for our clients.
Disk lock steel tubular scaffold
It is a new type of construction support systems, also known as the disk lock scaffold, disc-inserting scaffold, Layher scaffold and system scaffold. Its main components include the upright tube and horizontal tube, the nodes of the coupler are connected with the self-locking part, with reliable self-locking function and reasonable structure. The upright tube transmits the force via the axis, allowing the overall scaffold to be kept stable in 3D space to better meet the needs of safe construction.
Product Components
Upright tubes, horizontal tubes, inclined tubes, adjustable brackets, adjustable bases, hook steel pedals, skirting boards, steel staircases, joist brackets, trusses, cantilever frames, stamping couplers, galvanized steel tubes, galvanized square steel, L150 aluminum beams and L185 aluminum beams.
Product Features:
Light weight: When the same main material is used and 48 upright tubes with the specification 2.0 m are adopted, our product is 4% lighter than that with the long sleeve standing tube.
High strength: The part where our sleeve bears the stress is the step, which can withstand the pressure of 20 tons after the pressure test. Meanwhile, even if the steel tube is deformed, the stress-bearing part of the step is not damaged.
Casting joint: All our joints have been annealed to effectively eliminate internal stress, improve material toughness, reduce brittle damage and improve safety.
Pin: It is stamped with 6.5 mm-thick Q355 (Q345B) sheets with the arc-shaped design. Compared with wedge-shaped pin, it adds the additional self-locking function.
Long service life: All components adopt the hot-dip galvanizing anti-corrosion process, which can increase over 10 times of the service life than that of traditional scaffolds to avoid reduction in the bearing capacity caused by component rust.
Steel tubular scaffold with coupler
It is the most widely used scaffold among various scaffold categories. It is normally used in the construction projects with the low labor price and low load-bearing. The steel tubular scaffold with coupler is easy to cut and can be combined and erected upon different requirements.
Product Components
Cross couplers, docking couplers, steering couplers, anisotropic cross couplers, anisotropic steering couplers and galvanized steel tubes.
Square column fastener
The square column fastener is a new-type square column-shaped reinforcement products for construction and can be widely used in professional construction of columns, shear walls and other parts. It features recycling, labor saving, material saving, time saving and other economic advantages. It has a beautiful and neat shape to improve the degree of safety and civilized behavior of construction on the site.
Product Features:
High efficiency: It can be installed simply and rapidly, operated conveniently and used in wide applications.
Low cost: It has less accessories, can be reused for many times and is environment-friendly.
High strength: It has a high strength and is not easy to get deformed and expanded.
Good demoulding effect: It requires no threading wire. After demoulding, the column surface is smooth, so no secondary repair is required.
Beam clamp
It is divided into three parts: the fixed part (7-shaped chuck), adjustable part (mobile chuck) and bolt (pin). Among them, the fixed part and adjustable part are used to adjust the fixing distance, and the bolt is used to fix the formwork. This product is a new one specially developed for the beam construction on the site.
Product Features:
1. The reinforcement position is flexible and variable, and can be adjusted to a large extent.
2. It is equipped with less accessories, so it can be operated simply, and installed and disassembled easily.
3. Its size can be adjusted freely without punching.
4. The molding size is standard, and both the visual quality and the measured quality can reach excellent degree.